Dave's PCF WIP: Paragraphs

Paragraphs

Actions	Matter	Content	Para #	Notes	Modified
View Edit Delete	2380.2.01	While the write buffer 320 is being filled, the solid-state storage 110 may be used for other read operations. This is advantageous because other solid-state devices with a smaller write buffer or no write buffer may tie up the solid-state storage when data is written to a storage write buffer and data flowing into the storage write buffer stalls. Read operations will be blocked until the entire storage write buffer is filled and programmed. Another approach for systems without a write buffer or a small write buffer is to flush the storage write buffer that is not full in order to enable reads. Again this is inefficient because multiple write/program cycles are required to fill a page.	150	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, the write data pipeline 106 includes a write buffer 320 that buffers data for efficient write operations. Typically, the write buffer 320 includes enough capacity for packets to fill at least one virtual page in the solid-state storage 110. This allows a write operation to send an entire page of data to the solid-state storage 110 without interruption. By sizing the write buffer 320 of the write data pipeline 106 and buffers within the read data pipeline 108 to be the same capacity or larger than a storage write buffer within the solid-state storage 110, writing and reading data is more efficient since a single write command may be crafted to send a full virtual page of data to the solid-state storage 110 instead of multiple commands.	149	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	The garbage collector bypass 316 coordinates insertion of segments into the write data pipeline 106 with other segments being written by clients 114 or other devices. In the depicted embodiment, the garbage collector bypass 316 is before the packetizer 302 in the write data pipeline 106 and after the depacketizer 324 in the read data pipeline 108, but may also be located elsewhere in the read and write data pipelines 106, 108. The garbage collector bypass 316 may be used during a flush of the write pipeline 106 to fill the remainder of the virtual page in order to improve the efficiency of storage within the Solid-State Storage 110 and thereby reduce the frequency of garbage collection.	148	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	Once a section of storage has been marked for recovery, valid packets in the section typically must be relocated. The garbage collector bypass 316 allows packets to be read into the read data pipeline 108 and then transferred directly to the write data pipeline 106 without being routed out of the solid-state storage controller 104. In a preferred embodiment, the garbage collector bypass 316 is part of an autonomous garbage collector system that operates within the solid-state storage device 102. This allows the solid-state storage device 102 to manage data so that data is systematically spread throughout the solid-state storage 110 to improve performance, data reliability and to avoid overuse and underuse of any one location or area of the solid-state storage 110 and to lengthen the useful life of the solid-state storage 110.	147	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, the compression module 312 compresses a first segment with a first compression routine and passes along a second segment without compression. In another embodiment, the compression module 312 compresses a first segment with a first compression routine and compresses the second segment with a second compression routine. Having this flexibility within the solid-state storage device 102 is beneficial so that clients 114 or other devices writing data to the solid-state storage device 102 may each specify a compression routine or so that one can specify a compression routine while another specifies no compression. Selection of compression routines may also be selected according to default settings on a per object type or object class basis. For example, a first object of a specific object may be able to override default compression routine settings and a second object of the same object class and object type may use the default compression routine and a third object of the same object class and object type may use no compression.	145	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, the encryption module 314 encrypts a first packet with a first encryption key received in conjunction with the packet and encrypts a second packet with a second encryption key received in conjunction with the second packet. In another embodiment, the encryption module 314 encrypts a first packet with a first encryption key received in conjunction with the packet and passes a second data packet on to the next stage without encryption. Beneficially, the encryption module 314 included in the write data pipeline 106 of the solid-state storage device 102 allows object-by-object or segment-by-segment data encryption without a single file system or other external system to keep track of the different encryption keys used to store corresponding objects or data segments. Each requesting device 155 or related key manager independently manages encryption keys used to encrypt only the objects or data segments sent by the requesting device 155.	143	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, packets are written sequentially to the solid-state storage 110. For example, packets are streamed to the storage write buffers of a bank 214a of storage elements 216 and when the buffers are full, the packets are programmed to a designated virtual page. Packets then refill the storage write buffers and, when full, the packets are written to the next virtual page. The next virtual page may be in the same bank 214a or another bank (e.g. 214b). This process continues, virtual page after virtual page, typically until a virtual erase block is filled. In another embodiment, the streaming may continue across virtual erase block boundaries with the process continuing, virtual erase block after virtual erase block.	104	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In another embodiment, the write data pipeline 106 also includes an encryption module 314 that encrypts a data or metadata segment received from the input buffer 306, either directly or indirectly, prior sending the data segment to the packetizer 302, the data segment encrypted using an encryption key received in conjunction with the data segment. The encryption module 314 differs from the media encryption module 318 in that the encryption keys used by the encryption module 314 to encrypt data may not be common to all data stored within the solid-state storage device 102 but may vary on an object basis and received in conjunction with receiving data segments as described below. For example, an encryption key for a data segment to be encrypted by the encryption module 314 may be received with the data segment or may be received as part of a command to write an object to which the data segment belongs. The solid-sate storage device 102 may use and store a non-secret cryptographic nonce in each object packet that is used in conjunction with the encryption key. A different nonce may be stored with every packet. Data segments may be split between multiple packets with unique nonces for the purpose of improving protection by the encryption algorithm. In one embodiment, the nonce used by the media encryption module 318 is the same as that used by the encryption module 314.	141	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In a typical embodiment, the solid-state storage device 102 does not store the encryption key in non-volatile storage and allows no external access to the encryption key. The encryption key is provided to the solid-state storage controller 104 during initialization. The solid-sate storage device 102 may use and store a non-secret cryptographic nonce that is used in conjunction with an encryption key. A different nonce may be stored with every packet. Data segments may be split between multiple packets with unique nonces for the purpose of improving protection by the encryption algorithm. The encryption key may be received from a client 114, a computer 112, key manager, or other device that manages the encryption key to be used by the solid-state storage controller 104. In another embodiment, the solid-state storage 110 may have two or more partitions and the solid-state storage controller 104 behaves as though it were two or more solid-state storage controllers 104, each operating on a single partition within the solid-state storage 110. In this embodiment, a unique media encryption key may be used with each partition.	140	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, the write data pipeline 106 also includes a media encryption module 318 that receives the one or more packets from the packetizer 302, either directly or indirectly, and encrypts the one or more packets using an encryption key unique to the solid-state storage device 102 prior to sending the packets to the ECC generator 304. Typically, the entire packet is encrypted, including the headers. In another embodiment, headers are not encrypted. In this document, encryption key is understood to mean a secret encryption key that is managed externally from an embodiment that integrates the solid-state storage 110 and where the embodiment requires encryption protection. The media encryption module 318 and corresponding media decryption module 332 provide a level of security for data stored in the solid-state storage 110. For example, where data is encrypted with the media encryption module 318, if the solid-state storage 110 is connected to a different solid-state storage controller 104, solid-state storage device 102, or computer 112, the contents of the solid-state storage 110 typically could not be read without use of the same encryption key used during the write of the data to the solid-state storage 110 without significant effort.	139	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In another embodiment, the write data pipeline 106 also includes a write synchronization buffer 308 that buffers packets received from the ECC generator 304 prior to writing the packets to the solid-state storage 110. The write synch buffer 308 is located at a boundary between a local clock domain and a solid-state storage clock domain and provides buffering to account for the clock domain differences. In other embodiments, synchronous solid-state storage 110 may be used and synchronization buffers 308328 may be eliminated.	138	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, the write pipeline 106 includes an input buffer 306 that receives a data segment to be written to the solid-state storage 110 and stores the incoming data segments until the next stage of the write data pipeline 106, such as the packetizer 302 (or other stage for a more complex write data pipeline 106) is ready to process the next data segment. The input buffer 306 typically allows for discrepancies between the rate data segments are received and processed by the write data pipeline 106 using an appropriately sized data buffer. The input buffer 306 also allows the data bus 204 to transfer data to the write data pipeline 106 at rates greater than can be sustained by the write data pipeline 106 in order to improve efficiency of operation of the data bus 204. Typically when the write data pipeline 106 does not include an input buffer 306, a buffering function is performed elsewhere, such as in the solid-state storage device 102 but outside the write data pipeline 106, in the computer 112, such as within a network interface card (“NIC”), or at another device, for example when using remote direct memory access (“RDMA”).	137	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	Beneficially, using a robust ECC algorithm allowing more than single bit correction or even double bit correction allows the life of the solid-state storage 110 to be extended. For example, if flash memory is used as the storage medium in the solid-state storage 110, the flash memory may be written approximately 100,000 times without error per erase cycle. This usage limit may be extended using a robust ECC algorithm. Having the ECC generator 304 and corresponding ECC correction module 322 onboard the solid-state storage device 102, the solid-state storage device 102 can internally correct errors and has a longer useful life than if a less robust ECC algorithm is used, such as single bit correction. However, in other embodiments the ECC generator 304 may use a less robust algorithm and may correct single-bit or double-bit errors. In another embodiment, the solid-state storage device 110 may comprise less reliable storage such as multi-level cell (“MLC”) flash in order to increase capacity, which storage may not be sufficiently reliable without more robust ECC algorithms.	136	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	The write data pipeline 106 includes an ECC generator 304 that generates one or more error-correcting codes (“ECC”) for the one or more packets received from the packetizer 302. The ECC generator 304 typically uses an error correcting algorithm to generate ECC which is stored with the packet. The ECC stored with the packet is typically used to detect and correct errors introduced into the data through transmission and storage. In one embodiment, packets are streamed into the ECC generator 304 as un-encoded blocks of length N. A syndrome of length S is calculated, appended and output as an encoded block of length N+S. The value of N and S are dependent upon the characteristics of the algorithm which is selected to achieve specific performance, efficiency, and robustness metrics. In the preferred embodiment, there is no fixed relationship between the ECC blocks and the packets; the packet may comprise more than one ECC block; the ECC block may comprise more than one packet; and a first packet may end anywhere within the ECC block and a second packet may begin after the end of the first packet within the same ECC block. In the preferred embodiment, ECC algorithms are not dynamically modified. In a preferred embodiment, the ECC stored with the data packets is robust enough to correct errors in more than two bits.	135	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	Beneficially, creating an object index with entries indicating mapping between data segments and metadata of an object allows the storage controller 152 to autonomously handle and manage objects. This capability allows a great amount of flexibility for storing data in the storage device 150. Once the index entry for the object is created, subsequent object requests regarding the object can be serviced efficiently by the storage controller 152.	75	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In another embodiment, the object index reconstruction module 272 locates packets using packet header information along with container packet information to identify physical locations of the packets, object identifier, and sequence number of each packet to reconstruct entries in the object index. In one embodiment, erase blocks are time stamped or given a sequence number as packets are written and the timestamp or sequence information of an erase block is used along with information gathered from container headers and packet headers to reconstruct the object index. In another embodiment, timestamp or sequence information is written to an erase block when the erase block is recovered.	83	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	In one embodiment, the apparatus 200 includes an object index reconstruction module 272 that that reconstructs the entries in the object index using information from packet headers stored in the data storage device 154. In one embodiment, the object index reconstruction module 272 reconstructs the entries of the object index by reading headers to determine the object to which each packet belongs and sequence information to determine where in the object the data or metadata belongs. The object index reconstruction module 272 uses physical address information for each packet and timestamp or sequence information to create a mapping between the physical locations of the packets and the object identifier and data segment sequence. Timestamp or sequence information is used by the object index reconstruction module 272 to replay the sequence of changes made to the index and thereby typically reestablish the most recent state.	82	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	Each packet is associated with one container. In a preferred embodiment, containers are limited to an erase block so that at or near the beginning of each erase block a container packet can be found. This helps limit data loss to an erase block with a corrupted packet header. In this embodiment, if the object index is unavailable and a packet header within the erase block is corrupted, the contents from the corrupted packet header to the end of the erase block may be lost because there is possibly no reliable mechanism to determine the location of subsequent packets. In another embodiment, a more reliable approach is to have a container limited to a page boundary. This embodiment requires more header overhead. In another embodiment, containers can flow across page and erase block boundaries. This requires less header overhead but a larger portion of data may be lost if a packet header is corrupted. For these several embodiments it is expected that some type of RAID is used to further ensure data integrity.	81	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	A container, in one example, may be split between two or more logical/virtual pages. A container is identified by a container label that associates that container with an object. A container may contain zero to many packets and the packets within a container are typically from one object. A packet may be of many object element types, including object attribute elements, object data elements, object index elements, and the like. Hybrid packets may be created that include more than one object element type. Each packet may contain zero to many elements of the same element type. Each packet within a container typically contains a unique identifier that identifies the relationship to the object.	80	Added by DJM 3 2021	3/16/21, 12:00 AM
View Edit Delete	2380.2.01	A container is a data construct that facilitates more efficient storage of packets and helps establish relationships between an object and data packets, metadata packets, and other packets related to the object that are stored within the container. Note that the storage controller 152 typically treats object metadata received as part of an object and data segments in a similar manner. Typically “packet” may refer to a data packet comprising data, a metadata packet comprising metadata, or another packet of another packet type. An object may be stored in one or more containers and a container typically includes packets for no more than one unique object. An object may be distributed between multiple containers. Typically a container is stored within a single logical erase block (storage division) and is typically never split between logical erase blocks.	79	Added by DJM 3 2021	3/16/21, 12:00 AM

Page 373 of 438, showing 20 record(s) out of 8,747 total