11952091

Paragraph Number

185

A read operation is similar to the write example above. During a read operation, typically the bus arbiter 420, or other component of the bank interleave controller 344, receives data and corresponding status information and sends the data to the read data pipeline 108 while sending the status information on to the control and status registers 340. Typically, a read data command forwarded from bus arbiter 420 to the storage bus controller 348 will cause the MUX 350 to gate the read data on storage I/O bus 210 to the read data pipeline 108 and send status information to the appropriate control and status registers 340 through the status MUX 422.

Added by DJM 3 2021