Paragraph 183
Paragraph 183
Matter Number
2380.2.01
Paragraph Number
183
Application Number
11952091
Reference Case 1
2380.2.01
Reference Case 2
—
Created
3/16/21, 12:00 AM
Modified
3/16/21, 12:00 AM
Id
3,096
Content
The bus arbiter 420 typically coordinates selection of appropriate commands, and corresponding data when required for the command type, from the bank controllers 418 and sends the commands and data to the storage bus controller 348. The bus arbiter 420 typically also sends commands to the storage control bus 212 to select the appropriate bank 214. For the case of flash memory or other solid-state storage 110 with an asynchronous, bi-directional serial storage I/O bus 210, only one command (control information) or set of data can be transmitted at a time. For example, when write commands or data are being transmitted to the solid-state storage 110 on the storage I/O bus 210, read commands, data being read, erase commands, management commands, or other status commands cannot be transmitted on the storage I/O bus 210. For example, when data is being read from the storage I/O bus 210, data cannot be written to the solid-state storage 110.
Notes
Added by DJM 3 2021